A large tree cut this way can kick back toward you with deadly.
May 13, You need to use the chainsaw to cut a notch on tree in the direction you need the tree to fall. So you need to focus on making perfect cuts on the tree to avoid any type of significant problems with it. Then start cutting the tree at the opposite to where you cut the notch. Next, you need to start using wedges if you have a big shrubhauling.barted Reading Time: 6 mins. Cut a notch in the ground-facing (leaning) side of the tree.
Maneuvering the saw and angling the cuts may be difficult due to the tree’s lean, so take your time.
Cut a notch on the side of the tree that is leaning toward the ground. The notch depth should be 1/5 of. large tree may be felled against its natural lean by using the boring technique. Use the open-face notch and bore cut the tree to establish the hinge. DO NOT CUT OUT THE BACK. Allow enough backwood to keep the tree secure. Remove the saw from the bore cut and insert wedges tightly into it. Release the tree from the back. Complete the technique by wedging the tree over.
This technique is for. Chapter 3- Chain Saw Tasks and Techniques The following example shows the importance of following proper pro-cedures when bucking blowdown.
A chainsaw can be an invaluable tool around the home, especially during the colder.
A inch d.b.h. fir tree was lying across a steep slope; the butt end was still anchored by a few roots. About 30 feet from the roots, the tree File Size: 1MB.
The cutting procedure for felling a tree with chainsaw begins with a “hinge cut” which is a roughly degree cut (30 degrees at the bottom and 60 degrees at the top) made into the side of the tree in the direction you want it to fall.
This method isn't fool proof, but it does work really well!
The rule of thumb is to cut it to a depth of anywhere between 1/5th and 1/3rd the diameter of the tree. Jun 18, This video is the exam preperation for the European Chainsaw Certificate level 2. You can find more information about on shrubhauling.bar and.